Release note of version 1.3.2.9

README.md

@@ -1,69 +1,57 @@
 # MultiPar
 
-### v1.3.2.8 is public
-  This is a minor update version to fix some bugs in rare cases. 
-Most users don't see difference. 
-If there is no serious problem in this version, 
-next version will be the last of v1.3.2 tree.
+### v1.3.2.9 is public
+  This is the final release of v1.3.2 tree. 
+Because I want to public this as a stable version, I didn't change contents so much. 
+PAR clients are same as previous version. 
+Including long term used applications may be good to avoid false positive at Malware detection.
 
-  I fixed a [problem of MultiPar shell extension](https://github.com/Yutaka-Sawada/MultiPar/issues/86), 
-when UAC (User Account Control on Windows Vista or later) is disabled. 
-Thanks whulkhulk and Slava46 for test and confirm. 
-If other users could not "Integrate MultiPar into Shell" ago, he may try this new version.
+  I fixed a [compatibility issue in calling 7-Zip](https://github.com/Yutaka-Sawada/MultiPar/issues/92), 
+which I didn't know the change. 
+Thanks Lyoko-Jeremie for bug report. 
+The incident happened, when a user selected many files.
 
-  I added a confirm dialog at closing MultiPar, when it's creating or repairing. 
-This change may reduce accidental loss of working data. 
-Though MultiPar inherits most usage and behavior of QuickPar, I would improve a bit.
+  I made a sample feature to Save & Restore different "base directories". 
+When you put PAR files in another folder from source files, it will set the previous directory automatically. 
+Because this feature was tested little, it's disabled by default at this time. 
+If you want to enable, add section `[Path]` on "MultiPar.ini". 
+Then set `MRUMax` value, which is the maximum number of stored directries. 
+You may set the value upto 26. It's disabled, when the value is 0. 
+These two lines are like below:
+```
+[Path]
+MRUMax=5
+```
 
-  I fixed [small bugs in my OpenCL code for GPU](https://github.com/Yutaka-Sawada/MultiPar/issues/88). 
-Though I'm not sure the incident, it might not work rarely. 
-Because I don't use a graphics board on my PC, I didn't test myself. 
-Thanks apprehensivemom for test. 
-Even when you checked "Enable GPU acceleration", it may not use GPU for small data. 
-It's because starting GPU is slow. 
-If calculation finishes in a few seconds, using CPU only may be faster. 
-GPU may require at least a few minutes task to see speed difference. 
-As a note, I write its threshold below.
-
-Threshold to use GPU:
-- Data size must be larger than 512 MB.
-- Block size must be larger than 64 KB.
-- Number of source blocks must be more than 256.
-- Number of recovery blocks must be more than 32.
+  While I made MultiPar as an utility tool, I didn't give priority to its speed. 
+If someone wants faster Parchive tool, I suggest to use ParPar tools instead of MultiPar. 
+They are "[High performance PAR2 create client for NodeJS](https://github.com/animetosho/ParPar)" or 
+"[speed focused par2cmdline fork](https://github.com/animetosho/par2cmdline-turbo)". 
+Though the speed depends on hardware environments and user's setting, it would be 50% ~ 100 % faster than my par2j. 
+Only when you have a very fast graphics borad, GPU enabled par2j may be faster. 
+I plan to improve speed of par2j in next v1.3.3 tree.
+Though it will become 20% ~ 30% faster than old par2j, ParPar would be faster mostly.
 
 
-[ Changes from 1.3.2.7 to 1.3.2.8 ]  
+[ Changes from 1.3.2.8 to 1.3.2.9 ]  
 
 GUI update
-- Change
-  - It won't erase Zone.Identifier flag of MultiPar.exe automatically.
-  - It shows confirm dialog before close, when it's creating or repairing.
-
-- Improvement
-  - It will show error, when calling PAR client doesn't exist.
+- New
+  - Verification may save different base directories in MultiPar.ini file.
 
 - Bug fix
-  - When UAC is disabled, Shell Extesnion DLL uses HKEY_LOCAL_MACHINE.
-
-PAR2 client update
-- Bug fix
-  - It will show correct efficiency for over than TB size files.
-  - GPU function works with MMX, when all SSE2, SSSE3, AVX2 are disabled.
-
-All clients update
-- Change
-  - It will search hidden files, when Windows Explorer shows them.
+  - Archiver's option was updated for recent 7-Zip versions.
 
 
 [ Hash value ]  
 
-MultiPar1328.zip  
-MD5: C7BD23C0D32C47555E344D9D88C149C2  
-SHA1: 467F85E53011B3BC1E67E6685B1787D32B6F2296  
+MultiPar132.zip  
+MD5: 305D86C8C7A0F5C1A23CEAFFBE4F02BF  
+SHA1: 464BB7AB7D14FD35D2AEF99042EEB8E556DA0417  
 
-MultiPar1328_setup.exe  
-MD5: 4D7A3BA6B88D9F37A22C35C425DA5F4D  
-SHA1: 6BCCF834BC6038F1AC30F82B193A2B5F45FD7697  
+MultiPar132_setup.exe  
+MD5: 18F9BE1FF1C6D668E3A3906C691CCB98  
+SHA1: 116C6B2A15FCFD9BB74F0EF9D6C8A4BF78299588  
   To install under "Program Files" or "Program Files (x86)" directory, 
 you must start the installer with administrative privileges by selecting 
 "Run as administrator" on right-click menu.

alpha/ReadMe_Japanese.txt

@@ -1,220 +1,220 @@
+
+修復用データを作ってファイルの破損や消失に備える
 
-<EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>p<EFBFBD>f<EFBFBD>[<5B>^<5E><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ăt<C483>@<40>C<EFBFBD><43><EFBFBD>̔j<CC94><6A><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɔ<EFBFBD><C994><EFBFBD><EFBFBD><EFBFBD>
-
-MultiPar (<28>}<7D><><EFBFBD>`<60>p<EFBFBD>[)
+MultiPar (マルチパー)
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-[ <EFBFBD>ȒP<EFBFBD>ȉ<EFBFBD><EFBFBD><EFBFBD> ]
+[ 簡単な解説 ]
 
-<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD>̃t<CC83>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>烊<EFBFBD>J<EFBFBD>o<EFBFBD><6F><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>쐬<EFBFBD><EC90AC><EFBFBD>āA
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̃t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̈ꕔ<CC88><EA9594><EFBFBD>j<EFBFBD><6A><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482>A
-<EFBFBD>c<EFBFBD><EFBFBD><EFBFBD>ꂽ<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>ƃ<EFBFBD><C683>J<EFBFBD>o<EFBFBD><6F><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><67><EFBFBD>ďC<C48F><43><EFBFBD>E<EFBFBD><45><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ׂ̃\<5C>t<EFBFBD>g<EFBFBD>ł<EFBFBD><C582>B
-<EFBFBD><EFBFBD><EFBFBD>ʓI<EFBFBD>ȃt<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>\<5C>t<EFBFBD>g<EFBFBD>Ƃ͈قȂ<D982><C882>A
-<EFBFBD><EFBFBD><EFBFBD>炩<EFBFBD><EFBFBD><EFBFBD>߃<EFBFBD><EFBFBD>J<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ƂŁA
-<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̔j<CC94><6A><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɔ<EFBFBD><C994><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂<EFBFBD><CC82><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><C582>B
+　複数のファイルからリカバリ・ファイルを作成して、
+それらのファイルの一部が破損したり消失しても、
+残されたファイルとリカバリ・ファイルを使って修復・復元する為のソフトです。
+一般的なファイル復旧ソフトとは異なり、
+あらかじめリカバリ・ファイルを作っておくことで、
+ファイルの破損や消失に備えるのが特徴です。
 
-<EFBFBD>@CD <EFBFBD><EFBFBD> DVD <EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>ۂɁA<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ރf<EFBFBD>[<5B>^<5E>̃<EFBFBD><CC83>J<EFBFBD>o<EFBFBD><6F><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD>
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>āA<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɏĂ<EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD>΁A<EFBFBD><EFBFBD><EFBFBD>Ȃǂŕ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD>ɓǂ߂Ȃ<EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>A
-<EFBFBD><EFBFBD><EFBFBD>J<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><67><EFBFBD>ĕ<EFBFBD><C495><EFBFBD><EFBFBD><EFBFBD><EFBFBD>邱<EFBFBD>Ƃ<EFBFBD><C682>ł<EFBFBD><C582>܂<EFBFBD><DC82>B
-<EFBFBD>C<EFBFBD>O<EFBFBD>ł́A<EFBFBD>l<EFBFBD>b<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD>[<5B>N<EFBFBD>o<EFBFBD>R<EFBFBD>ŕ<EFBFBD><C595><EFBFBD><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>]<5D><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ۂɁA
-<EFBFBD>ꕔ<EFBFBD>̃t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>Ŏ<EFBFBD><C58E>s<EFBFBD><73><EFBFBD>Ă<EFBFBD><C482>đ<EFBFBD><C491>M<EFBFBD><4D><EFBFBD>邱<EFBFBD>ƂȂ<C682><C882>A
-<EFBFBD><EFBFBD><EFBFBD>J<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><67><EFBFBD>Č<EFBFBD><C48C><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>₤<EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD>p<EFBFBD>r<EFBFBD><72><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ł<EFBFBD><C582>B
+　CD や DVD を焼く際に、書き込むデータのリカバリ・ファイルを
+作って、それも同時に焼いておけば、傷などで部分的に読めなくなっても、
+リカバリ・ファイルを使って復元することができます。
+海外では、ネットワーク経由で複数ファイルを転送する際に、
+一部のファイルで失敗しても再送信することなく、
+リカバリ・ファイルを使って欠落部分を補うという用途が多いようです。
 
-<EFBFBD>@Parchive <EFBFBD>Ƃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>J<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>`<60><><EFBFBD>ɂ͕W<CD95><57><EFBFBD>\<5C>t<EFBFBD>g<EFBFBD>Ƃ<EFBFBD><C682><EFBFBD>
-Peter Clements <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>́u QuickPar <EFBFBD>v<EFBFBD>Ƃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>AQuickPar <EFBFBD>͉<EFBFBD><EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>O<EFBFBD>ɊJ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>f<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>āA
-<EFBFBD><EFBFBD><EFBFBD>{<7B><><EFBFBD>̃t<CC83>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD>H<EFBFBD><48><EFBFBD>_<EFBFBD><5F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><C682>ł<EFBFBD><C582>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ŁA<EFBFBD>Ȃ<EFBFBD><EFBFBD>ׂ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>Ȏg<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>œ<EFBFBD><EFBFBD>{<7B>ꂪ<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>ގ<EFBFBD><DE8E>\<5C>t<EFBFBD>g<EFBFBD>Ƃ<EFBFBD><C682>āA
-<EFBFBD>ނ̋<EFBFBD><EFBFBD>‚𓾂āA<EFBFBD><EFBFBD><EFBFBD>̃A<EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>P<EFBFBD>[<5B>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>J<EFBFBD><4A><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+　Parchive というリカバリ・ファイル形式には標準ソフトとして
+Peter Clements さんの「 QuickPar 」というのがあります。
+しかし、QuickPar は何年も前に開発が中断されていて、
+日本語のファイル名やフォルダを扱うことができません。
+そこで、なるべく同じような使い勝手で日本語が使える類似ソフトとして、
+彼の許可を得て、このアプリケーションを開発しました。
 
-<EFBFBD>@QuickPar <EFBFBD>̓o<EFBFBD>O<EFBFBD>񍐂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>P<EFBFBD>_<EFBFBD>̗v<EFBFBD>]<5D><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD>f<EFBFBD><66><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882><EFBFBD><EFBFBD>߁A
-PAR 2.0 <EFBFBD>Ńt<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><43><EFBFBD>ł<EFBFBD><C582><EFBFBD><EFBFBD>”\<5C><><EFBFBD><EFBFBD> MultiPar <20>̕<EFBFBD><CC95><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><C582>B
-<EFBFBD><EFBFBD><EFBFBD>{<7B><><EFBFBD>̃t<CC83>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>AQuickPar <20>ł͏C<CD8F><43><EFBFBD>ł<EFBFBD><C582>Ȃ<EFBFBD><C882><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɂ́A
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD> MultiPar <EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><EFBFBD><EFBFBD>Ă݂Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+　QuickPar はバグ報告や改善点の要望があっても反映されないため、
+PAR 2.0 でファイルを修復できる可能性は MultiPar の方が高いです。
+日本語のファイル名を使う時や、QuickPar では修復できなかった時には、
+ぜひ MultiPar を使ってみてください。
 
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-[ <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>d<EFBFBD>l<EFBFBD>Ȃ<EFBFBD> ]
+[ 特徴や仕様など ]
 
-<EFBFBD>@MultiPar <EFBFBD><EFBFBD> PAR 1.0 <EFBFBD><EFBFBD> PAR 2.0 <EFBFBD>̗<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɑΉ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă܂<EFBFBD><EFBFBD>B
-Parity Archive <EFBFBD><EFBFBD> Parity Volume Set <EFBFBD>d<EFBFBD>l<EFBFBD>̏ڍׂɂ‚<EFBFBD><EFBFBD>Ă<EFBFBD>
-<EFBFBD>u http://parchive.sourceforge.net/ <EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>Q<EFBFBD>Ƃ<EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-MultiPar <EFBFBD>̓<EFBFBD><EFBFBD>j<EFBFBD>R<EFBFBD>[<5B>h (UTF-8 <EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD> UTF-16) <EFBFBD>Ńt<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂ŁA
-<EFBFBD><EFBFBD><EFBFBD>{<7B>ꂾ<EFBFBD><EA82BE><EFBFBD>łȂ<C582><C882><EFBFBD><EFBFBD>̌<EFBFBD><CC8C><EFBFBD><EFBFBD>̃t<CC83>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ƌ<EFBFBD><C68C><EFBFBD><EFBFBD>E<EFBFBD>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>邱<EFBFBD>Ƃ<EFBFBD><C682>ł<EFBFBD><C582>܂<EFBFBD><DC82>B
+　MultiPar は PAR 1.0 と PAR 2.0 の両方に対応してます。
+Parity Archive と Parity Volume Set 仕様の詳細については
+「 http://parchive.sourceforge.net/ 」を参照してください。
+MultiPar はユニコード (UTF-8 または UTF-16) でファイル名を扱うので、
+日本語だけでなく他の言語のファイル名もきちんと検査・修復することができます。
 
-<EFBFBD>@MultiPar <EFBFBD><EFBFBD> PAR 2.0 <EFBFBD>ł̓t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>łȂ<C582><C882>t<EFBFBD>H<EFBFBD><48><EFBFBD>_<EFBFBD><5F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><C682>ł<EFBFBD><C582>܂<EFBFBD><DC82>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>AQuickPar <EFBFBD>̓T<EFBFBD>u<EFBFBD>E<EFBFBD>f<EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>N<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD>𐳂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>F<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>̂ŁA
-MultiPar <EFBFBD>Ńf<EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>N<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD>\<5C><><EFBFBD><EFBFBD><EFBFBD>܂ރp<DE83><70><EFBFBD>e<EFBFBD>B<EFBFBD><42><EFBFBD>ɂ<EFBFBD><C982>쐬<EFBFBD><EC90AC><EFBFBD>Ă<EFBFBD><C482>A
-<EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃɒ<EFBFBD><EFBFBD>ӂ<EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-par2cmdline <EFBFBD><EFBFBD> MultiPar <EFBFBD>Ɠ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>j<EFBFBD>R<EFBFBD>[<5B>h<EFBFBD>ƃf<C683>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>\<5C><><EFBFBD><EFBFBD><EFBFBD>F<EFBFBD><46><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂ő<CC82><C591><EFBFBD><EFBFBD>v<EFBFBD>ł<EFBFBD><C582>B
-MultiPar <EFBFBD>̓p<EFBFBD><EFBFBD><EFBFBD>e<EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>ɂɃR<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><EFBFBD><EFBFBD>t<EFBFBD><EFBFBD><EFBFBD>邱<EFBFBD>Ƃ<EFBFBD><EFBFBD>ł<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>A
-QuickPar <EFBFBD>ȂǑ<EFBFBD><EFBFBD><EFBFBD> PAR <20>N<EFBFBD><4E><EFBFBD>C<EFBFBD>A<EFBFBD><41><EFBFBD>g<EFBFBD>̓R<CD83><52><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>@<40>\<5C>ɑΉ<C991><CE89><EFBFBD><EFBFBD>ĂȂ<C482><C882>悤<EFBFBD>ł<EFBFBD><C582>B
+　MultiPar の PAR 2.0 ではファイルだけでなくフォルダを扱うこともできます。
+ただし、QuickPar はサブ・ディレクトリを正しく認識しないので、
+MultiPar でディレクトリ構造を含むパリティ書庫を作成しても、
+うまく検査できないことに注意してください。
+par2cmdline は MultiPar と同じくユニコードとディレクトリ構造を認識するので大丈夫です。
+MultiPar はパリティ書庫にコメントを付けることができますが、
+QuickPar など他の PAR クライアントはコメント機能に対応してないようです。
 
-[ <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>‹<EFBFBD> ]
+[ 動作環境 ]
 
-<EFBFBD>@Windows Vista <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ȍ~ (Windows 7, 8, 10) <EFBFBD>̃p<EFBFBD>\<5C>R<EFBFBD><52><EFBFBD><EFBFBD><EFBFBD>K<EFBFBD>v<EFBFBD>ł<EFBFBD><C582>B
+　Windows Vista かそれ以降 (Windows 7, 8, 10) のパソコンが必要です。
 
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-[ <EFBFBD>s<EFBFBD><EFBFBD>⌇<EFBFBD>ׂȂ<EFBFBD> ]
+[ 不具合や欠陥など ]
 
-<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD>m<EFBFBD>F<EFBFBD>͂<EFBFBD><CD82><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>ɂ<EFBFBD><C982>Ă<EFBFBD><C482>̂ł<CC82><C582><EFBFBD><EFBFBD>A<EFBFBD>s<EFBFBD><EFBFBD><EF8D87><EFBFBD><EFBFBD><EFBFBD>邩<EFBFBD><E982A9><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɖ<EFBFBD><EFBFBD>肪<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꍇ<EFBFBD>́A<EFBFBD><EFBFBD><EFBFBD>̏󋵂<EFBFBD><EFBFBD>Ǐ<EFBFBD><EFBFBD>Ȃǂ<EFBFBD><EFBFBD>񍐂<EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>炦<EFBFBD><EFBFBD><EFBFBD>ƁA
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̃o<EFBFBD>[<5B>W<EFBFBD><57><EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>A<EFBFBD>b<EFBFBD>v<EFBFBD>ŏC<C58F><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>w<EFBFBD>͂<EFBFBD><CD82>܂<EFBFBD><DC82>B
-<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>@<40>\<5C><><EFBFBD>lj<EFBFBD><C789><EFBFBD><EFBFBD>ė~<7E><><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><C682>A<EFBFBD>ǂ<EFBFBD><C782><EFBFBD><EFBFBD><EFBFBD><EFBFBD>P<EFBFBD><50><EFBFBD>ė~<7E><><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD><EFBFBD><EFBFBD>v<EFBFBD>]<5D><><EFBFBD>󂯕t<F382AF95><74><EFBFBD>܂<EFBFBD><DC82>B
+　動作確認はそれなりにしてるのですが、不具合があるかもしれません。
+動作に問題があった場合は、その状況や症状などを報告してもらえると、
+今後のバージョン・アップで修正するよう努力します。
+新しい機能を追加して欲しいとか、どこを改善して欲しいといった要望も受け付けます。
 
-<EFBFBD>@<40><><EFBFBD>Ȃ݂ɁA<C981><41><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>肵<EFBFBD>đ<EFBFBD><C491>Q<EFBFBD><51><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><C682>Ă<EFBFBD><C482><EFBFBD><EFBFBD>Q<EFBFBD><51><EFBFBD><EFBFBD><EFBFBD>͂ł<CD82><C582>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>l<EFBFBD>ŊJ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă邩<EFBFBD><EFBFBD><EFBFBD>ł͂Ȃ<EFBFBD><EFBFBD>A<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ̃}<7D>C<EFBFBD>N<EFBFBD><4E><EFBFBD>\<5C>t<EFBFBD>g<EFBFBD>̉<EFBFBD><CC89><EFBFBD><EFBFBD>~<7E><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>\<5C>t<EFBFBD>g<EFBFBD>ł<EFBFBD>
-<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD>̃\<5C>t<EFBFBD>g<EFBFBD><67><EFBFBD>g<EFBFBD><67><EFBFBD>ĉ<EFBFBD><C489><EFBFBD><EFBFBD>N<EFBFBD><4E><EFBFBD>Ă<EFBFBD><C482>ӔC<D394>͎<EFBFBD><CD8E><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>v<EFBFBD>݂<EFBFBD><DD82><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>菑<EFBFBD><E88F91><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B
-<EFBFBD>@<40><><EFBFBD>I<EFBFBD>ȗ<EFBFBD><C897>t<EFBFBD><74><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂<EFBFBD><CC82>ǂ<EFBFBD><C782><EFBFBD><EFBFBD>͂<EFBFBD><CD82>Ă<EFBFBD><C482><EFBFBD><EFBFBD>A<EFBFBD>p<EFBFBD>\<5C>R<EFBFBD><52><EFBFBD>E<EFBFBD>\<5C>t<EFBFBD>g<EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD>̂͂<CC82><CD82><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><C582>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>[<5B>U<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă鎞<C482>Ɏ<EFBFBD><C98E>ȐӔC<D394>ʼn<EFBFBD><C589><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD>̂<EFBFBD><CC82><EFBFBD><EFBFBD>Șb<C898>Ȃ̂ŁA
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>_<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Q<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>菜<EFBFBD><EFBFBD><EFBFBD>菕<EFBFBD><EFBFBD><EFBFBD>͂ł<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B
+　ちなみに、誤った使い方をしたりして損害が発生したとしても損害賠償はできません。
+個人で開発してるからではなく、大手企業のマイクロソフトの何万円もするソフトでも
+「このソフトを使って何が起きても責任は取らない」みたいなことがしっかり書いてあります。
+法律的な裏付けがあるのかどうかはさておき、パソコン・ソフトというのはそういう物です。
+ただまあ、ユーザーが困ってる時に自己責任で解決しろというのも酷な話なので、
+私も問題点が何かとか障害を取り除く手助けはできる限りやります。
 
 
-[ <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>R<EFBFBD>k<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> ]
+[ 情報漏洩や改竄 ]
 
-<EFBFBD>@Parity Archive (<EFBFBD>p<EFBFBD><EFBFBD><EFBFBD>e<EFBFBD>B<EFBFBD><EFBFBD><EFBFBD><EFBFBD>) <20><><EFBFBD>̂ɂ́A
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̘R<EFBFBD>k<EFBFBD><EFBFBD><EFBFBD>Ӑ}<7D>I<EFBFBD>ȉ<EFBFBD>₂<EFBFBD><E28282>h<EFBFBD><68><EFBFBD>悤<EFBFBD>Ȏd<C88E>g<EFBFBD>݂͂<DD82><CD82><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-Parity <EFBFBD>Ƃ́u<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>l<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>•<EFBFBD><EFBFBD>v<EFBFBD>Ƃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ӗ<EFBFBD><EFBFBD>Ȃ̂ŁA
-<EFBFBD>p<EFBFBD><EFBFBD><EFBFBD>e<EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>ɂɂ̓\<5C>[<5B>X<EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>Ɠ<EFBFBD><C693><EFBFBD><EFBFBD><EFBFBD><EFBFBD>l<EFBFBD><6C><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂Ƃ<CC82><C682>Ĉ<EFBFBD><C488><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD>ނ̃t<CC83>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>Í<EFBFBD><C38D><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>A<EFBFBD>Í<EFBFBD><C38D><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ń<EFBFBD><C583>J<EFBFBD>o<EFBFBD><6F><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>쐬<EFBFBD><EC90AC><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>܂<EFBFBD><EFBFBD>A<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>̊m<EFBFBD><EFBFBD><EFBFBD>łȂ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>J<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><67><EFBFBD>ďC<C48F><43><EFBFBD><EFBFBD><EFBFBD>邱<EFBFBD>Ƃ́A
-<EFBFBD><EFBFBD><EFBFBD>e<EFBFBD><EFBFBD><EFBFBD>肩<EFBFBD>łȂ<EFBFBD><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>u<EFBFBD><75><EFBFBD>̂Ɠ<CC82><C693><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃł<C682><C582>B
-<EFBFBD>O<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>玝<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>񂾎<EFBFBD><EFBFBD>s<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>h<EFBFBD>L<EFBFBD><4C><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><67><EFBFBD>E<EFBFBD>B<EFBFBD><42><EFBFBD>X<EFBFBD>Ɋ<EFBFBD><C98A><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă邩<C482><E982A9><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>A
-<EFBFBD>̂Ɠ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɁA<EFBFBD>O<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>玝<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>񂾃<EFBFBD><EFBFBD>J<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>ŏC<C58F><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD>
-<EFBFBD>E<EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>Ɋ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꂽ<EFBFBD><EFBFBD><EFBFBD>̂ɂȂ<EFBFBD><EFBFBD>Ă邩<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>‚܂<EFBFBD><EFBFBD>A<EFBFBD><EFBFBD>₂<EFBFBD><EFBFBD>ꂽ<EFBFBD>p<EFBFBD><EFBFBD><EFBFBD>e<EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>ɂ<EFBFBD><EFBFBD>g<EFBFBD><EFBFBD><EFBFBD>ăt<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD>ƁA
-<EFBFBD>{<7B><><EFBFBD>Ӑ}<7D><><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ͏C<CD8F><43><EFBFBD><EFBFBD><EFBFBD>ꂸ<EFBFBD>A<EFBFBD><41>₂<EFBFBD><E28282>ꂽ<EFBFBD>f<EFBFBD>[<5B>^<5E>ɂȂ<C982><C882>܂<EFBFBD><DC82>B
+　Parity Archive (パリティ書庫) 自体には、
+情報の漏洩や意図的な改竄を防ぐような仕組みはありません。
+Parity とは「同じ価値を持つ物」という意味なので、
+パリティ書庫にはソース・ファイルと同じ価値があるものとして扱ってください。
+機密書類のファイルを暗号化するなら、暗号化した後でリカバリ・ファイルを作成してください。
+また、出所の確かでないリカバリ・ファイルを使って修復することは、
+内容が定かでないファイルを置くのと同じことです。
+外部から持ち込んだ実行ファイルやドキュメントがウィルスに感染してるかもしれない、
+のと同じように、外部から持ち込んだリカバリ・ファイルで修復したファイルは
+ウィルスに感染させられたものになってるかもしれません。
+つまり、改竄されたパリティ書庫を使ってファイルを修復しようとすると、
+本来意図したようには修復されず、改竄されたデータになります。
 
 
-[ PAR 3.0 <EFBFBD>d<EFBFBD>l<EFBFBD>͒<EFBFBD><EFBFBD>ĔłŖ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> ]
+[ PAR 3.0 仕様は提案版で未完成 ]
 
-<EFBFBD>@MultiPar <EFBFBD>ł<EFBFBD> Parchive <EFBFBD>d<EFBFBD>l<EFBFBD>̎<EFBFBD><EFBFBD><EFBFBD><EFBFBD>o<EFBFBD>[<5B>W<EFBFBD><57><EFBFBD><EFBFBD><EFBFBD>Ăł<C482><C582><EFBFBD> PAR 3.0 <EFBFBD><EFBFBD>
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD>Ɏg<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂȂ<EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>APAR 3.0 <20>d<EFBFBD>l<EFBFBD>͂܂<CD82><DC82>ڍׂ<DA8D><D782><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̉<EFBFBD><CC89><EFBFBD><EFBFBD><EFBFBD><EFBFBD>i<EFBFBD>K<EFBFBD>ŁA
-MultiPar <EFBFBD>͂<EFBFBD><EFBFBD>̎<EFBFBD><EFBFBD><EFBFBD><EFBFBD>i<EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><EFBFBD><EFBFBD>ĐV<EFBFBD>d<EFBFBD>l<EFBFBD>̐<EFBFBD><EFBFBD>\<5C><><EFBFBD>̊<EFBFBD><CC8A>ł<EFBFBD><C582><EFBFBD><EFBFBD>ɂ<EFBFBD><C982><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-PAR 3.0 <EFBFBD>d<EFBFBD>l<EFBFBD>̃t<EFBFBD>H<EFBFBD>[<5B>}<7D>b<EFBFBD>g<EFBFBD>͍ו<CD8D><D795><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD>ōŏI<C58F>łƂ̌݊<CC8C><DD8A><EFBFBD><EFBFBD>͕ۏ؂<DB8F><D882><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>‚܂<EFBFBD><EFBFBD>AMultiPar <EFBFBD>Ŏ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>i<EFBFBD><EFBFBD> PAR3 <20><><EFBFBD>J<EFBFBD>o<EFBFBD><6F><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482>A
-<EFBFBD><EFBFBD><EFBFBD>̃<EFBFBD><EFBFBD>J<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̃o<CC83>[<5B>W<EFBFBD><57><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><C582>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>Ƃ͌<C682><CD8C><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD>l<EFBFBD>ɁA<EFBFBD><EFBFBD><EFBFBD>̐l<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>o<EFBFBD>[<5B>W<EFBFBD><57><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><67><EFBFBD>Ă<EFBFBD><C482>Ƃ͌<C682><CD8C><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>̂ŁA
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>i<EFBFBD><EFBFBD> PAR3 <20><><EFBFBD>J<EFBFBD>o<EFBFBD><6F><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>͑<EFBFBD><CD91>l<EFBFBD>ɑ<EFBFBD><C991><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>ł<EFBFBD><C582><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+　MultiPar では Parchive 仕様の次期バージョン案である PAR 3.0 を
+実験的に使えるようになっています。
+しかし、PAR 3.0 仕様はまだ詳細を検討中の下書き段階で、
+MultiPar はその試作品を使って新仕様の性能を体感できるにすぎません。
+PAR 3.0 仕様のフォーマットは細部が流動的で最終版との互換性は保証されません。
+つまり、MultiPar で試作品の PAR3 リカバリ・ファイルを今作っても、
+そのリカバリ・ファイルを将来のバージョンでも使えるとは限りません。
+同様に、他の人が同じバージョンを使ってるとは限らないので、
+試作品の PAR3 リカバリ・ファイルは他人に送らないでください。
 
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-[ <EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD>[<5B>ł̃C<CC83><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD>ƃA<C683><41><EFBFBD>C<EFBFBD><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><> ]
+[ インストーラー版のインストールとアンインストール ]
 
-<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD>[ ( MultiPar131_setup.exe <EFBFBD>݂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȗ<EFBFBD><EFBFBD>O ) <20><><EFBFBD>_<EFBFBD>u<EFBFBD><75><EFBFBD>E<EFBFBD>N<EFBFBD><4E><EFBFBD>b<EFBFBD>N<EFBFBD><4E><EFBFBD><EFBFBD><EFBFBD>ƁA
-<EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>ʂ<EFBFBD><CA82>\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂ŁA<C581><41><EFBFBD>̎w<CC8E><77><EFBFBD>ɏ]<5D><><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>o<EFBFBD>[<5B>W<EFBFBD><57><EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>A<EFBFBD>b<EFBFBD>v<EFBFBD><76><EFBFBD>ɁA<C981>ݒ荀<DD92>ڂ<EFBFBD><DA82><EFBFBD><EFBFBD>̂܂܎g<DC8E><67><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>͏㏑<CD8F><E38F91><EFBFBD>C<EFBFBD><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><C582>B
-<EFBFBD>㏑<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>O<EFBFBD>ɁA<C981>uMultiPar <20><><EFBFBD>V<EFBFBD>F<EFBFBD><46><EFBFBD>ɓ<EFBFBD><C993><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>v<EFBFBD>̃`<60>F<EFBFBD>b<EFBFBD>N<EFBFBD><4E><EFBFBD>O<EFBFBD><4F><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>㏑<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><41><EFBFBD>C<EFBFBD><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> OS <20>̍ċN<C48B><4E><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>߂<EFBFBD><DF82><EFBFBD><EFBFBD>邩<EFBFBD><E982A9><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>uProgram Files<EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>uProgram Files (x86)<EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>ɃC<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɂ́A
-<EFBFBD>E<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>b<EFBFBD>N<EFBFBD>E<EFBFBD><EFBFBD><EFBFBD>j<EFBFBD><EFBFBD><EFBFBD>[<5B>́u<CC81>Ǘ<EFBFBD><C797>҂Ƃ<D282><C682>Ď<EFBFBD><C48E>s<EFBFBD>v<EFBFBD><76><EFBFBD>I<EFBFBD><49><EFBFBD><EFBFBD>
-<EFBFBD>Ǘ<EFBFBD><EFBFBD>Ҍ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ŃC<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD>[<5B><><EFBFBD>J<EFBFBD>n<EFBFBD><6E><EFBFBD><EFBFBD><EFBFBD>K<EFBFBD>v<EFBFBD><76><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B
+　インストーラー ( MultiPar131_setup.exe みたいな名前 ) をダブル・クリックすると、
+インストール画面が表示されるので、その指示に従ってください。
+バージョン・アップ時に、設定項目をそのまま使いたい時は上書きインストールしてもいいです。
+上書きインストールする前に、「MultiPar をシェルに統合する」のチェックを外してください。
+上書きインストールやアンインストール後に OS の再起動を求められるかもしれません。
+「Program Files」や「Program Files (x86)」内にインストールするには、
+右クリック・メニューの「管理者として実行」を選んで
+管理者権限でインストーラーを開始する必要があります。
 
-<EFBFBD>@<40>A<EFBFBD><41><EFBFBD>C<EFBFBD><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD> Windows OS <20>̃R<CC83><52><EFBFBD>g<EFBFBD><67><EFBFBD>[<5B><><EFBFBD>E<EFBFBD>p<EFBFBD>l<EFBFBD><6C><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>s<EFBFBD><73><EFBFBD><EFBFBD><EFBFBD>A
-MultiPar <EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD>H<EFBFBD><48><EFBFBD>_<EFBFBD><5F><EFBFBD><EFBFBD> unins000.exe <20><><EFBFBD>_<EFBFBD>u<EFBFBD><75><EFBFBD>E<EFBFBD>N<EFBFBD><4E><EFBFBD>b<EFBFBD>N<EFBFBD><4E><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD>[<5B>͐ݒ<CD90><DD92>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>ォ<EFBFBD><E382A9><EFBFBD>u<EFBFBD><75><EFBFBD>ꂽ<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>폜<EFBFBD><ED8F9C><EFBFBD>Ȃ<EFBFBD><C882>̂ŁA
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>Ȃ玩<EFBFBD><EFBFBD><EFBFBD>ō폜<EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+　アンインストールは Windows OS のコントロール・パネルから行うか、
+MultiPar をインストールしたフォルダ内の unins000.exe をダブル・クリックしてください。
+アンインストーラーは設定ファイルや後から置かれたファイルを削除しないので、
+もう使うことがないなら自分で削除してください。
 
-<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD>[<5B>ł<EFBFBD><C582>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>ꍇ<EFBFBD>́A<CD81>C<EFBFBD><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD>H<EFBFBD><48><EFBFBD>_<EFBFBD>𓮂<EFBFBD><F093AE82><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>ł<EFBFBD><C582><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>ƁA<EFBFBD><EFBFBD><EFBFBD>ŃA<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD>Ɏ<EFBFBD><C98E>s<EFBFBD><73><EFBFBD>邱<EFBFBD>ƂɂȂ<C982><C882>܂<EFBFBD><DC82>B
+　インストーラー版を使った場合は、インストールしたフォルダを動かさないでください。
+さもないと、後でアンインストールに失敗することになります。
 
-[ <EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD>[<5B>łɂ<C582><C982>镡<EFBFBD><E995A1><EFBFBD><EFBFBD><EFBFBD>[<5B>U<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>̃C<CC83><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><> ]
+[ インストーラー版による複数ユーザー向けのインストール ]
 
-<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD>̃<EFBFBD><CC83>[<5B>U<EFBFBD>[<5B><><EFBFBD>p<EFBFBD>\<5C>R<EFBFBD><52><EFBFBD>Ƀ<EFBFBD><C983>O<EFBFBD>I<EFBFBD><49><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>A
-<EFBFBD>Ǘ<EFBFBD><EFBFBD>҂͑S<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> MultiPar <20><><EFBFBD>C<EFBFBD><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>邱<EFBFBD>Ƃ<EFBFBD><C682>ł<EFBFBD><C582>܂<EFBFBD><DC82>B
-<EFBFBD>Ǘ<EFBFBD><EFBFBD>Ҍ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ŃC<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>΁A<CE81>C<EFBFBD><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>^<5E>[<5B>g<EFBFBD>E<EFBFBD><45><EFBFBD>j<EFBFBD><6A><EFBFBD>[<5B>̃A<CC83>C<EFBFBD>R<EFBFBD><52><EFBFBD>A
-<EFBFBD>f<EFBFBD>X<EFBFBD>N<EFBFBD>g<EFBFBD>b<EFBFBD>v<EFBFBD>̃A<EFBFBD>C<EFBFBD>R<EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ăt<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̊֘A<D698>t<EFBFBD><74><EFBFBD>͑S<CD91>Ẵ<C482><CC83>[<5B>U<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>p<EFBFBD>ł<EFBFBD><C582>܂<EFBFBD><DC82>B
-<EFBFBD>uProgram Files<EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>ɃC<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꍇ<EFBFBD>A<EFBFBD><41><EFBFBD>ꂼ<EFBFBD><EA82BC><EFBFBD>̃<EFBFBD><CC83>[<5B>U<EFBFBD>[<5B><><EFBFBD>•ʂɐݒ<C990><DD92><EFBFBD><EFBFBD>ێ<EFBFBD><DB8E><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B
-<EFBFBD><EFBFBD><EFBFBD>̑<EFBFBD><EFBFBD>̃t<EFBFBD>H<EFBFBD><EFBFBD><EFBFBD>_<EFBFBD>ɃC<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꍇ<EFBFBD>A<EFBFBD>S<EFBFBD>Ẵ<C482><CC83>[<5B>U<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݒ<EFBFBD><DD92><EFBFBD><EFBFBD><EFBFBD><EFBFBD>L<EFBFBD><4C><EFBFBD>܂<EFBFBD><DC82>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̏ꍇ<EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>[<5B>U<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD>C<EFBFBD>R<EFBFBD><52><EFBFBD><EFBFBD><EFBFBD>֘A<D698>t<EFBFBD><74><EFBFBD>͂<EFBFBD><CD82>̃<EFBFBD><CC83>[<5B>U<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>p<EFBFBD>ł<EFBFBD><C582>܂<EFBFBD><DC82>B
+　複数のユーザーがパソコンにログオンするなら、
+管理者は全員向けに MultiPar をインストールすることができます。
+管理者権限でインストールすれば、インストーラーが作ったスタート・メニューのアイコン、
+デスクトップのアイコン、そしてファイルの関連付けは全てのユーザーが利用できます。
+「Program Files」内にインストールした場合、それぞれのユーザーが個別に設定を保持します。
+その他のフォルダにインストールした場合、全てのユーザーが同じ設定を共有します。
+いずれの場合も、ユーザーが作ったアイコンや関連付けはそのユーザーだけが利用できます。
 
 
-[ <EFBFBD>A<EFBFBD>[<5B>J<EFBFBD>C<EFBFBD>u<EFBFBD>ł̃C<CC83><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><> ]
+[ アーカイブ版のインストール ]
 
-<EFBFBD>@<40>z<EFBFBD>z<EFBFBD><7A><EFBFBD><EFBFBD><EFBFBD>Ă鈳<C482>k<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43> ( MultiPar131.zip <20>݂<EFBFBD><DD82><EFBFBD><EFBFBD>Ȗ<EFBFBD><C896>O ) <20><><EFBFBD>𓀂<EFBFBD><F0938082>Ăł<C482><C582><EFBFBD><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD>
-<EFBFBD>ǂ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>K<EFBFBD><EFBFBD><EFBFBD>ȃt<EFBFBD>H<EFBFBD><EFBFBD><EFBFBD>_<EFBFBD>ɑS<EFBFBD>ē<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD>̒<EFBFBD><EFBFBD><EFBFBD> MultiPar.exe <EFBFBD>Ƃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂<EFBFBD> MultiPar <EFBFBD>̎<EFBFBD><EFBFBD>s<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>ł<EFBFBD><C582>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>_<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>b<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> MultiPar <20><><EFBFBD>N<EFBFBD><4E><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B
+　配布されてる圧縮ファイル ( MultiPar131.zip みたいな名前 ) を解凍してできたファイルを
+どこか適当なフォルダに全て入れてください。
+その中の MultiPar.exe というのが MultiPar の実行ファイルです。
+それをダブル・クリックすると MultiPar が起動します。
 
-<EFBFBD>@MultiPar <EFBFBD>̐ݒ<EFBFBD><EFBFBD>_<EFBFBD>C<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>O<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD>[<5B>g<EFBFBD>J<EFBFBD>b<EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A
-<EFBFBD><EFBFBD><EFBFBD>J<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>֘A<D698>t<EFBFBD><74><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><C582>܂<EFBFBD><DC82>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD>u.par<61>v<EFBFBD><76><EFBFBD>u.par2<72>v<EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD>g<EFBFBD><67><EFBFBD>q<EFBFBD>̃t<CC83>@<40>C<EFBFBD><43><EFBFBD><EFBFBD> MultiPar <20>Ɋ֘A<D698>t<EFBFBD><74><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꍇ<EFBFBD>́A
-<EFBFBD><EFBFBD><EFBFBD>ɑ<EFBFBD><EFBFBD>̃A<EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>P<EFBFBD>[<5B>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD>ł̊֘A<D698>t<EFBFBD><74><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD>ɂ<EFBFBD><C982>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>Ⴆ<EFBFBD>΁A<EFBFBD><EFBFBD><EFBFBD><EFBFBD> QuickPar <EFBFBD>Ɋ֘A<EFBFBD>t<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>̂Ȃ<EFBFBD><EFBFBD>AQuickPar <20>̐ݒ<CC90><DD92>ʼn<EFBFBD><C589><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B
+　MultiPar の設定ダイアログから、ショートカットを作ったり、
+リカバリ・ファイルを関連付けしたりできます。
+ただし、「.par」や「.par2」という拡張子のファイルを MultiPar に関連付けする場合は、
+先に他のアプリケーションでの関連付けを解除してからにしてください。
+例えば、既に QuickPar に関連付けされてるのなら、QuickPar の設定で解除しておきます。
 
-[ <EFBFBD>A<EFBFBD>[<5B>J<EFBFBD>C<EFBFBD>u<EFBFBD>ł̃A<CC83><41><EFBFBD>C<EFBFBD><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><> ]
+[ アーカイブ版のアンインストール ]
 
-<EFBFBD>@MultiPar.exe <EFBFBD>Ȃǂ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꂽ<EFBFBD>t<EFBFBD>H<EFBFBD><EFBFBD><EFBFBD>_<EFBFBD><EFBFBD><EFBFBD>ƍ폜<EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>ݒ<EFBFBD><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD>H<EFBFBD><48><EFBFBD>_<EFBFBD><5F><EFBFBD>ɍ<EFBFBD><C98D><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂œ<CC82><C593><EFBFBD><EFBFBD>ɍ폜<C98D><ED8F9C><EFBFBD>Ă<EFBFBD><C482>܂<EFBFBD><DC82>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD>uProgram Files<EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>̃t<EFBFBD>H<EFBFBD><EFBFBD><EFBFBD>_<EFBFBD>ɃC<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꍇ<EFBFBD>́A
-<EFBFBD>ݒ<EFBFBD><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>́uApplication Data<EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>̃t<EFBFBD>H<EFBFBD><EFBFBD><EFBFBD>_<EFBFBD>ɍ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂ŁA<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>폜<EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD>J<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD> MultiPar <20>Ɋ֘A<D698>t<EFBFBD><74><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482>ꍇ<EFBFBD>́A
-<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD>̑O<CC91>Ɋ֘A<D698>t<EFBFBD><74><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+　MultiPar.exe などを入れたフォルダごと削除してください。
+設定ファイルも同じフォルダ内に作られるので同時に削除してかまいません。
+ただし、「Program Files」内のフォルダにインストールしてあった場合は、
+設定ファイルは「Application Data」内のフォルダに作られるので、それも削除してください。
+リカバリ・ファイルを MultiPar に関連付けしてる場合は、
+アンインストールの前に関連付けを解除しておいてください。
 
-<EFBFBD>@MultiPar <EFBFBD><EFBFBD><EFBFBD>V<EFBFBD>F<EFBFBD><EFBFBD><EFBFBD>ɓ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ԃł<EFBFBD> MultiParShlExt64.dll <20>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>폜<EFBFBD>ł<EFBFBD><C582>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>K<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɐݒ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʂŃ`<60>F<EFBFBD>b<EFBFBD>N<EFBFBD><4E><EFBFBD>O<EFBFBD><4F><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD> MultiPar.exe <EFBFBD><EFBFBD><EFBFBD>폜<EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>ꍇ<EFBFBD>́A
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ƂŃV<EFBFBD>F<EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>邱<EFBFBD>Ƃ<EFBFBD><C682>ł<EFBFBD><C582>܂<EFBFBD><DC82>B
-<EFBFBD>u<EFBFBD>R<EFBFBD>}<7D><><EFBFBD>h <20>v<EFBFBD><76><EFBFBD><EFBFBD><EFBFBD>v<EFBFBD>g<EFBFBD>v<EFBFBD><76><EFBFBD>J<EFBFBD><4A><EFBFBD><EFBFBD> MultiParShlExt64.dll <20><><EFBFBD><EFBFBD><EFBFBD>݂<EFBFBD><DD82><EFBFBD><EFBFBD>f<EFBFBD>B<EFBFBD><42><EFBFBD>N<EFBFBD>g<EFBFBD><67><EFBFBD>Ɉړ<C988><DA93><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD>A
-<EFBFBD>uRegSvr32.exe /u MultiParShlExt64.dll<EFBFBD>v<EFBFBD>Ɠ<EFBFBD><EFBFBD>͂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ή<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B
-<EFBFBD>G<EFBFBD>N<EFBFBD>X<EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>[<5B><><EFBFBD>N<EFBFBD><4E><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482>ꍇ<EFBFBD>̓t<CD83>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>폜<EFBFBD><ED8F9C><EFBFBD><EFBFBD><EFBFBD>O<EFBFBD>Ɉ<EFBFBD><C988>U<EFBFBD>‚<EFBFBD><C282>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><EFBFBD><EFBFBD><EFBFBD>߂Ȃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>U<EFBFBD><EFBFBD><EFBFBD>O<EFBFBD>I<EFBFBD>t<EFBFBD><EFBFBD><EFBFBD>āA<EFBFBD>ēx<EFBFBD><EFBFBD><EFBFBD>O<EFBFBD>I<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD>폜<EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B 
+　MultiPar をシェルに統合した状態では MultiParShlExt64.dll というファイルを削除できません。
+必ず先に設定画面でチェックを外してください。
+既に MultiPar.exe を削除してしまってる場合は、
+手作業でシェル拡張をアンインストールすることもできます。
+「コマンド プロンプト」を開いて MultiParShlExt64.dll が存在するディレクトリに移動してから、
+「RegSvr32.exe /u MultiParShlExt64.dll」と入力すれば解除されます。
+エクスプローラーを起動してる場合はファイルを削除する前に一旦閉じてください。
+それでもだめなら一旦ログオフして、再度ログオンしてから削除してください。 
 
-[ <EFBFBD>A<EFBFBD>[<5B>J<EFBFBD>C<EFBFBD>u<EFBFBD>ł̃C<CC83><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>̕ύX ]
+[ アーカイブ版のインストール先の変更 ]
 
-<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD>H<EFBFBD><48><EFBFBD>_<EFBFBD>̏ꏊ<CC8F><EA8F8A><EFBFBD>ς<EFBFBD><CF82><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>́A
-<EFBFBD>t<EFBFBD>H<EFBFBD><EFBFBD><EFBFBD>_<EFBFBD><EFBFBD><EFBFBD>ƕʂ̏ꏊ<EFBFBD>ɃR<EFBFBD>s<EFBFBD>[<5B><><EFBFBD>邩<EFBFBD>ړ<EFBFBD><DA93><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>p<EFBFBD><EFBFBD><EFBFBD>e<EFBFBD>B<EFBFBD><EFBFBD><EFBFBD>ɂ<EFBFBD><EFBFBD>֘A<EFBFBD>t<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>ꍇ<EFBFBD>́A<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD>ʒu<CA92>𔽉f<F094BD89><66><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ׂɁA
-<EFBFBD>֘A<EFBFBD>t<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>U<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>x<EFBFBD>ݒ肵<EFBFBD>Ȃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+　インストールしたフォルダの場所を変えたい時は、
+フォルダごと別の場所にコピーするか移動してください。
+パリティ書庫を関連付けをしてた場合は、新しいインストール位置を反映させる為に、
+関連付けを一旦解除してもう一度設定しなおしてください。
 
-<EFBFBD>@<40>ݒ<EFBFBD><DD92>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>ȂǕK<C795>v<EFBFBD>ȃt<C883>@<40>C<EFBFBD><43><EFBFBD>͑S<CD91>ē<EFBFBD><C493><EFBFBD><EFBFBD>t<EFBFBD>H<EFBFBD><48><EFBFBD>_<EFBFBD><5F><EFBFBD>ɍ<EFBFBD><C98D><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂ŁA
-<EFBFBD>t<EFBFBD>H<EFBFBD><EFBFBD><EFBFBD>_<EFBFBD><EFBFBD><EFBFBD>ƃ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>[<5B>o<EFBFBD>u<EFBFBD><75><EFBFBD>E<EFBFBD>f<EFBFBD>B<EFBFBD>X<EFBFBD>N<EFBFBD><4E> USB<53><42><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>[<5B>ɕۑ<C995><DB91><EFBFBD><EFBFBD>Ă<EFBFBD><C482><EFBFBD><EFBFBD>āA
-<EFBFBD><EFBFBD><EFBFBD>̂܂ܕʂ̃p<EFBFBD>\<5C>R<EFBFBD><52><EFBFBD>Ŏg<C58E><67><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><C682>”\<5C>ł<EFBFBD><C582>B
-<EFBFBD><EFBFBD><EFBFBD><EFBFBD> MultiPar <EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><C482>ʂ̃p<CC83>\<5C>R<EFBFBD><52><EFBFBD>ł<EFBFBD><C582><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݒ<EFBFBD><DD92>Ŏg<C58E><67><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꍇ<EFBFBD>́A
-<EFBFBD>ݒ<EFBFBD><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43> (MultiPar.ini) <EFBFBD><EFBFBD><EFBFBD>R<EFBFBD>s<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>Γ<EFBFBD><CE93><EFBFBD><EFBFBD>ݒ<EFBFBD><DD92>œ<EFBFBD><C593>삵<EFBFBD>܂<EFBFBD><DC82>B
+　設定ファイルなど必要なファイルは全て同じフォルダ内に作られるので、
+フォルダごとリムーバブル・ディスクや USBメモリーに保存しておいて、
+そのまま別のパソコンで使うことも可能です。
+既に MultiPar がインストールされてる別のパソコンでも同じ設定で使いたい場合は、
+設定ファイル (MultiPar.ini) をコピーすれば同じ設定で動作します。
 
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-[ <EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>Z<EFBFBD><EFBFBD><EFBFBD>X ]
+[ ライセンス ]
 
-<EFBFBD>@MultiPar <EFBFBD>̓R<EFBFBD><EFBFBD><EFBFBD>\<5C>[<5B><><EFBFBD>E<EFBFBD>A<EFBFBD>v<EFBFBD><76><EFBFBD>P<EFBFBD>[<5B>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><C682><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ăяo<D18F><6F> GUI <20>A<EFBFBD>v<EFBFBD><76><EFBFBD>P<EFBFBD>[<5B>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD>Ƃ<EFBFBD><C682><EFBFBD>
-<EFBFBD><EFBFBD><EFBFBD>i<EFBFBD>K<EFBFBD>\<5C><><EFBFBD>ɂȂ<C982><C882>Ă<EFBFBD><C482>̂ŁA<C581>@<40>\<5C>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>o<EFBFBD>[<5B>W<EFBFBD><57><EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>A<EFBFBD>b<EFBFBD>v<EFBFBD><76><EFBFBD>e<EFBFBD>Ղł<D582><C582>B
-PAR <EFBFBD>p<EFBFBD>R<EFBFBD><EFBFBD><EFBFBD>\<5C>[<5B><><EFBFBD>E<EFBFBD>A<EFBFBD>v<EFBFBD><76><EFBFBD>P<EFBFBD>[<5B>V<EFBFBD><56><EFBFBD><EFBFBD> (par1j.exe <EFBFBD><EFBFBD> par2j.exe) <EFBFBD><EFBFBD> GPL <EFBFBD>ɏ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD>̑<EFBFBD><EFBFBD>̃R<EFBFBD><EFBFBD><EFBFBD>\<5C>[<5B><><EFBFBD>E<EFBFBD>A<EFBFBD>v<EFBFBD><76><EFBFBD>P<EFBFBD>[<5B>V<EFBFBD><56><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
-GUI <EFBFBD>A<EFBFBD>v<EFBFBD><EFBFBD><EFBFBD>P<EFBFBD>[<5B>V<EFBFBD><56><EFBFBD><EFBFBD> (MultiPar.exe) <20>͕<EFBFBD><CD95>ʂ̃t<CC83><74><EFBFBD>[<5B>\<5C>t<EFBFBD>g<EFBFBD>ł<EFBFBD><C582>B
-MultiPar <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂܂܎g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>ꂼ<EFBFBD><EFBFBD><EFBFBD>̃<EFBFBD><EFBFBD>C<EFBFBD>Z<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>̈Ⴂ<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>ɂ<EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><EFBFBD>B
-<EFBFBD>\<5C>[<5B>X<EFBFBD>E<EFBFBD>R<EFBFBD>[<5B>h<EFBFBD><68>GitHub<75>ɒu<C992><75><EFBFBD>Ă܂<C482><DC82>B
+　MultiPar はコンソール・アプリケーションとそれを呼び出す GUI アプリケーションという
+二段階構成になってるので、機能拡張やバージョン・アップが容易です。
+PAR 用コンソール・アプリケーション (par1j.exe と par2j.exe) は GPL に準拠します。
+その他のコンソール・アプリケーションや
+GUI アプリケーション (MultiPar.exe) は普通のフリーソフトです。
+MultiPar をそのまま使うだけなら、それぞれのライセンスの違いを気にしなくていいです。
+ソース・コードはGitHubに置いてます。
 (URL: "https://github.com/Yutaka-Sawada/MultiPar")
 
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-[ <EFBFBD>A<EFBFBD><EFBFBD><EFBFBD><EFBFBD> ]
+[ 連絡先 ]
 
-<EFBFBD>@<40><><EFBFBD>{<7B>I<EFBFBD>Ƀ<EFBFBD><C983>[<5B>U<EFBFBD>[<5B>E<EFBFBD>T<EFBFBD>|<7C>[<5B>g<EFBFBD>̓<EFBFBD><CD83>[<5B><><EFBFBD>ōs<C58D><73><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>A
-GitHub<EFBFBD><EFBFBD>issue<EFBFBD>y<EFBFBD>[<5B>W<EFBFBD>ɏ<EFBFBD><C98F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><C582><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><C582>B
+　基本的にユーザー・サポートはメールで行いますが、
+GitHubのissueページに書き込んでもいいです。
 (URL: "https://github.com/Yutaka-Sawada/MultiPar/issues")
 
-<EFBFBD><EFBFBD><EFBFBD>O<EFBFBD><EFBFBD> <20>V<EFBFBD>c <20>L <20>ł<EFBFBD><C582>B
-<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD>E<EFBFBD>A<EFBFBD>h<EFBFBD><68><EFBFBD>X<EFBFBD><58> tenfon (at mark) outlook.jp <EFBFBD>ł<EFBFBD><EFBFBD>B
-<EFBFBD>̂̃<EFBFBD><EFBFBD>[<5B><><EFBFBD>E<EFBFBD>A<EFBFBD>h<EFBFBD><68><EFBFBD>X<EFBFBD><58> ten_fon (at mark) mail.goo.ne.jp <EFBFBD>ł<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>A
-2014<EFBFBD>N3<EFBFBD><EFBFBD><EFBFBD>ɃT<EFBFBD>[<5B>r<EFBFBD>X<EFBFBD>I<EFBFBD><49><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂ŁA<C581><41><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɂ͑<C982><CD91><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>悤<EFBFBD>ɂ<EFBFBD><C982>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD><EFBFBD><EFBFBD>f<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>ۂ̕\<5C>L<EFBFBD>Ȃ̂ŁA<C581><41><EFBFBD>ۂ̃<DB82><CC83>[<5B><><EFBFBD>ł<EFBFBD> (at mark) <EFBFBD><EFBFBD> @ <EFBFBD>Ɋ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+名前は 澤田 豊 です。
+メール・アドレスは tenfon (at mark) outlook.jp です。
+昔のメール・アドレスは ten_fon (at mark) mail.goo.ne.jp でしたが、
+2014年3月にサービス終了したので、そっちには送らないようにしてください。
+迷惑メール拒否の表記なので、実際のメールでは (at mark) を @ に換えてください。
 
 
-[ <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>N ]
+[ リンク ]
 
-<EFBFBD>@<40>x<EFBFBD>N<EFBFBD>^<5E>[<5B>̍<EFBFBD><CC8D>҃y<D283>[<5B>W<EFBFBD>ł͊O<CD8A><4F><EFBFBD>l<EFBFBD><6C><EFBFBD><EFBFBD><EFBFBD><EFBFBD> MultiPar <20><><EFBFBD>Љ<D089>Ă<EFBFBD><C482>܂<EFBFBD><DC82>B
+　ベクターの作者ページでは外国人向けに MultiPar を紹介しています。
 (URL: "https://hp.vector.co.jp/authors/VA021385/")
-<EFBFBD>x<EFBFBD>N<EFBFBD>^<5E>[<5B>̐<EFBFBD><CC90><EFBFBD><EFBFBD>ȃ_<C883>E<EFBFBD><45><EFBFBD><EFBFBD><EFBFBD>[<5B>h<EFBFBD>E<EFBFBD>y<EFBFBD>[<5B>W<EFBFBD>͕ʂɂ<CA82><C982><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B
+ベクターの正式なダウンロード・ページは別にあります。
 (URL: "https://www.vector.co.jp/soft/dl/winnt/util/se460801.html")
-<EFBFBD><EFBFBD><EFBFBD>{<7B>l<EFBFBD><6C><EFBFBD><EFBFBD><EFBFBD>Ƀ<EFBFBD><C983><EFBFBD><EFBFBD>N<EFBFBD><4E><EFBFBD>ڂ<EFBFBD><DA82><EFBFBD><EFBFBD>ۂ́A<CD81>x<EFBFBD>N<EFBFBD>^<5E>[<5B>̍<EFBFBD><CC8D>i<EFBFBD>Љ<EFBFBD><D089>y<EFBFBD>[<5B>W<EFBFBD>ɂ<EFBFBD><C982>Ă<EFBFBD><C482><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+日本人向けにリンクを載せる際は、ベクターの作品紹介ページにしてください。
 (URL: "https://www.vector.co.jp/soft/winnt/util/se460801.html")
 

alpha/Update_English.txt

@@ -2,6 +2,17 @@ Release note of v1.3.2 tree
 
  I tried to decrease probability of false positive at Malware detection.
 
+[ Changes from 1.3.2.8 to 1.3.2.9 ] (2023/08/26)
+
+GUI update
+ New
+  Verification may save different base directories in MultiPar.ini file.
+
+ Bug fix
+  Archiver's option was updated for recent 7-Zip versions.
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
 [ Changes from 1.3.2.7 to 1.3.2.8 ] (2023/06/08)
 
 GUI update

alpha/Update_Japanese.txt

@@ -1,148 +1,148 @@
-v1.3.2 <EFBFBD>̍X<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD><EFBFBD> (2023/06/08)
+v1.3.2 の更新情報 (2023/08/26)
 
-[ 1.3.1 <EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1.3.2 <EFBFBD>ւ̕ύX<EFBFBD>_ ]
+[ 1.3.1 から 1.3.2 への変更点 ]
 
-<EFBFBD>@<40>}<7D><><EFBFBD>E<EFBFBD>F<EFBFBD>A<EFBFBD>Ƃ<EFBFBD><C682>Č댟<C48C>m<EFBFBD><6D><EFBFBD><EFBFBD><EFBFBD>ɂ<EFBFBD><C982><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+　マルウェアとして誤検知されにくいようにしました。
 
-<EFBFBD>EGUI <EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40><><EFBFBD>슮<EFBFBD><EC8AAE><EFBFBD><EFBFBD><EFBFBD><EFBFBD> Python <20>X<EFBFBD>N<EFBFBD><4E><EFBFBD>v<EFBFBD>g<EFBFBD><67><EFBFBD>Ăяo<D18F><6F><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@Python <EFBFBD>X<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>v<EFBFBD>g<EFBFBD>ō<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>֗<EFBFBD><EFBFBD>c<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>‚<EFBFBD><C282>lj<EFBFBD><C789><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・GUI の変更点
+　動作完了時に Python スクリプトを呼び出せるようにしました。
+　Python スクリプトで作った便利ツールをいくつか追加しました。
 
-<EFBFBD>E<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD>R<EFBFBD>A<EFBFBD><41> CPU <20>p<EFBFBD>ɍœK<C593><4B><EFBFBD><EFBFBD><EFBFBD>đ<EFBFBD><C491><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・クライアントの変更点
+　複数コアの CPU 用に最適化して速くなりました。
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-v1.3.1 <EFBFBD>̍X<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD><EFBFBD> (2021/09/09)
+v1.3.1 の更新情報 (2021/09/09)
 
-<EFBFBD>@Windows XP <EFBFBD>𓮍<EFBFBD><EFBFBD>Ώۂ<EFBFBD> OS <20><><EFBFBD><EFBFBD><EFBFBD>O<EFBFBD><4F><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+　Windows XP を動作対象の OS から外しました。
 
-[ 1.3.0 <EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1.3.1 <EFBFBD>ւ̕ύX<EFBFBD>_ ]
+[ 1.3.0 から 1.3.1 への変更点 ]
 
-<EFBFBD>EGUI <EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40>}<7D><><EFBFBD>`<60>E<EFBFBD><45><EFBFBD>j<EFBFBD>^<5E>[<5B>‹<EFBFBD><C28B>ɑΉ<C991><CE89><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40>u<EFBFBD><75><EFBFBD>b<EFBFBD>N<EFBFBD>T<EFBFBD>C<EFBFBD>Y<EFBFBD>̍ő<CC8D><C591>l<EFBFBD><6C> 2 GB <20>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・GUI の変更点
+　マルチ・モニター環境に対応しました。
+　ブロックサイズの最大値を 2 GB にしました。
 
-<EFBFBD>E<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@HDD <EFBFBD><EFBFBD><EFBFBD><EFBFBD> PAR2 <EFBFBD>̃<EFBFBD><EFBFBD>J<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>쐬<EFBFBD><EC90AC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@SSD <EFBFBD><EFBFBD><EFBFBD><EFBFBD> PAR2 <EFBFBD>̃n<EFBFBD>b<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD>l<EFBFBD>v<EFBFBD>Z<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>@OS <EFBFBD><EFBFBD> Windows 7 <EFBFBD>ȍ~<7E>Ȃ<EFBFBD><C882>ASSD <EFBFBD><EFBFBD> HDD <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʂ<EFBFBD><EFBFBD>ď<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+・クライアントの変更点
+　HDD 上で PAR2 のリカバリ・ファイル作成が速くなりました。
+　SSD 上で PAR2 のハッシュ値計算が速くなりました。
+　OS が Windows 7 以降なら、SSD と HDD を識別して処理するようにしました。
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-v1.3.0 <EFBFBD>̍X<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD><EFBFBD> (2020/03/03)
+v1.3.0 の更新情報 (2020/03/03)
 
-[ 1.2.9 <EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1.3.0 <EFBFBD>ւ̕ύX<EFBFBD>_ ]
+[ 1.2.9 から 1.3.0 への変更点 ]
 
-<EFBFBD>EGUI <EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40><><EFBFBD>J<EFBFBD>o<EFBFBD><6F><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̑傫<CC91><E582AB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɐ<EFBFBD><C990><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɊO<C98A><4F><EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>lj<EFBFBD><C789>ł<EFBFBD><C582><EFBFBD><EFBFBD>ʂ𑝂₵<F0919D82>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・GUI の変更点
+　リカバリ・ファイルの大きさを常に制限するようにしました。
+　検査時に外部ファイルを追加できる量を増やしました。
 
-<EFBFBD>E<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@PAR1 <EFBFBD>ő傫<EFBFBD>ȃt<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̃`<60>F<EFBFBD>b<EFBFBD>N<EFBFBD>T<EFBFBD><54><EFBFBD>v<EFBFBD>Z<EFBFBD>~<7E>X<EFBFBD><58><EFBFBD>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@PAR2 <EFBFBD>Łuchecksum mismatch<EFBFBD>v<EFBFBD>G<EFBFBD><EFBFBD><EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40>傫<EFBFBD><E582AB> VRAM <EFBFBD><EFBFBD> GPU <EFBFBD>ł<EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+・クライアントの変更点
+　PAR1 で大きなファイルのチェックサム計算ミスを修正しました。
+　PAR2 で「checksum mismatch」エラーが発生する問題を修正しました。
+　大きな VRAM の GPU でもうまく動くようにしました。
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-v1.2.9 <EFBFBD>̍X<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD><EFBFBD> (2016/12/12)
+v1.2.9 の更新情報 (2016/12/12)
 
-[ 1.2.8 <EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1.2.9 <EFBFBD>ւ̕ύX<EFBFBD>_ ]
+[ 1.2.8 から 1.2.9 への変更点 ]
 
-<EFBFBD>EGUI <EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40>v<EFBFBD><76><EFBFBD>O<EFBFBD><4F><EFBFBD>X<EFBFBD>E<EFBFBD>o<EFBFBD>[<5B><><EFBFBD>̕<EFBFBD><CC95><EFBFBD><EFBFBD>̔w<CC94>i<EFBFBD><69><EFBFBD>ύX<CF8D>ł<EFBFBD><C582><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40><><EFBFBD>s<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̃`<60>F<EFBFBD>b<EFBFBD>N<EFBFBD>T<EFBFBD><54><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>؂<EFBFBD><D882>Ĕj<C494><6A><EFBFBD><EFBFBD><EFBFBD>x<EFBFBD><78><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@7-Zip <EFBFBD>ƘA<EFBFBD>g<EFBFBD><EFBFBD><EFBFBD>ď<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+・GUI の変更点
+　プログレス・バー上の文字の背景を変更できるようにしました。
+　実行ファイルのチェックサムを検証して破損を警告するようにしました。
+　7-Zip と連携して処理できるようにしました。
 
-<EFBFBD>E<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40>Â<EFBFBD> CPU <EFBFBD><EFBFBD> GPU <EFBFBD>ł<EFBFBD><EFBFBD>Ȃ<EFBFBD><EFBFBD>ׂ<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>@ZIP / 7-Zip <EFBFBD><EFBFBD><EFBFBD>ɂɃ<EFBFBD><EFBFBD>J<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD><EFBFBD><EFBFBD>R<EFBFBD>[<5B>h<EFBFBD><68><EFBFBD>t<EFBFBD><74><EFBFBD>ł<EFBFBD><C582><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・クライアントの変更点
+　古い CPU や GPU でもなるべく速く動くようにしました。
+　ZIP / 7-Zip 書庫にリカバリ・レコードを付加できるようにしました。
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-v1.2.8 <EFBFBD>̍X<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD><EFBFBD> (2015/10/27)
+v1.2.8 の更新情報 (2015/10/27)
 
-<EFBFBD>@GPU <EFBFBD>ɂ<EFBFBD><EFBFBD>鍂<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă܂<EFBFBD><EFBFBD>B
+　GPU による高速化を実験してます。
 
-[ 1.2.7 <EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1.2.8 <EFBFBD>ւ̕ύX<EFBFBD>_ ]
+[ 1.2.7 から 1.2.8 への変更点 ]
 
-<EFBFBD>EGUI <EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40>v<EFBFBD><76><EFBFBD>O<EFBFBD><4F><EFBFBD>X<EFBFBD>E<EFBFBD>o<EFBFBD>[<5B><><EFBFBD>̕<EFBFBD><CC95><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>₷<EFBFBD><E282B7><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@GPU <EFBFBD><EFBFBD><EFBFBD>g<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݒ<EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʂőI<EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>@64-bit OS <EFBFBD>ł<EFBFBD> 64-bit <EFBFBD>ł<EFBFBD> par2j <EFBFBD><EFBFBD><EFBFBD>Ăяo<EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+・GUI の変更点
+　プログレス・バー上の文字を見やすくしました。
+　GPU を使うかを設定画面で選択できるようにしました。
+　64-bit OS では 64-bit 版の par2j を呼び出すようにしました。
 
-<EFBFBD>E<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@GPU <EFBFBD><EFBFBD> PAR2 <EFBFBD>̏<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>@<40><><EFBFBD>J<EFBFBD>o<EFBFBD><6F><EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>̔j<CC94><6A><EFBFBD><EFBFBD><EFBFBD>ʒm<CA92><6D><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・クライアントの変更点
+　GPU で PAR2 の処理を高速化するようにしました。
+　リカバリ・ファイルの破損も通知するようにしました。
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-v1.2.7 <EFBFBD>̍X<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD><EFBFBD> (2015/05/26)
+v1.2.7 の更新情報 (2015/05/26)
 
-<EFBFBD>@SSE2 (Pentium 4 <EFBFBD>ȍ~<7E><> CPU <20>̊g<CC8A><67><EFBFBD>@<40>\) <20><><EFBFBD>K<EFBFBD>{<7B>ɂȂ<C982><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+　SSE2 (Pentium 4 以降の CPU の拡張機能) が必須になりました。
 
-[ 1.2.6 <EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1.2.7 <EFBFBD>ւ̕ύX<EFBFBD>_ ]
+[ 1.2.6 から 1.2.7 への変更点 ]
 
-<EFBFBD>EGUI <EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʂ<EFBFBD><CA82>\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>啝<EFBFBD>ɕύX<CF8D><58><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40>L<EFBFBD><4C><EFBFBD><EFBFBD><EFBFBD>Z<EFBFBD><5A><EFBFBD><EFBFBD><EFBFBD>㏑<EFBFBD><E38F91><EFBFBD>ɑ΂<C991><CE82>Ċm<C48A>F<EFBFBD>_<EFBFBD>C<EFBFBD>A<EFBFBD><41><EFBFBD>O<EFBFBD><4F><EFBFBD>o<EFBFBD><6F><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40>x<EFBFBD><78><EFBFBD><EFBFBD><EFBFBD>̃<EFBFBD><CC83>b<EFBFBD>Z<EFBFBD>[<5B>W<EFBFBD>E<EFBFBD>{<7B>b<EFBFBD>N<EFBFBD>X<EFBFBD><58><EFBFBD>e<EFBFBD>E<EFBFBD>C<EFBFBD><43><EFBFBD>h<EFBFBD>E<EFBFBD>̒<EFBFBD><CC92><EFBFBD><EFBFBD>ɏo<C98F><6F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂȂ<C982><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・GUI の変更点
+　検査結果を表示する方式が大幅に変更されました。
+　キャンセルや上書きに対して確認ダイアログを出すようにしました。
+　警告等のメッセージ・ボックスが親ウインドウの中央に出現するようになりました。
 
-<EFBFBD>E<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40><><EFBFBD>ꂼ<EFBFBD><EA82BC><EFBFBD>̃t<CC83>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>O<EFBFBD>Ƀt<C983>@<40>C<EFBFBD><43><EFBFBD>ꗗ<EFBFBD><EA9797><EFBFBD>\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD>ȃt<C883>@<40>C<EFBFBD><43><EFBFBD>ɑ΂<C991><CE82>Ă͌<C482><CD8C><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʂ<EFBFBD><CA82>L<EFBFBD>^<5E><><EFBFBD>Ȃ<EFBFBD><C882>悤<EFBFBD>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40>\<5C>[<5B>X<EFBFBD>E<EFBFBD>u<EFBFBD><75><EFBFBD>b<EFBFBD>N<EFBFBD><4E><EFBFBD><EFBFBD><EFBFBD>‚<EFBFBD><C282><EFBFBD><EFBFBD>ł<EFBFBD><C582><EFBFBD><EFBFBD>J<EFBFBD>o<EFBFBD><6F><EFBFBD>E<EFBFBD>u<EFBFBD><75><EFBFBD>b<EFBFBD>N<EFBFBD><4E><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>[<5B>Ȃǂ̌̏<CC8C><CC8F><EFBFBD><EFBFBD><EFBFBD><EFBFBD>o<EFBFBD><6F><EFBFBD>ăG<C483><47><EFBFBD>[<5B>\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ɂ<EFBFBD><C982>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・クライアントの変更点
+　それぞれのファイルを検査する前にファイル一覧を表示するようにしました。
+　小さなファイルに対しては検査結果を記録しないようにしました。
+　ソース・ブロックが一個だけでもリカバリ・ブロックを作れるようにしました。
+　メモリーなどの故障を検出してエラー表示するようにしました。
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-v1.2.6 <EFBFBD>̍X<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD><EFBFBD> (2014/10/08)
+v1.2.6 の更新情報 (2014/10/08)
 
-<EFBFBD>@Windows 2000 <EFBFBD>𓮍<EFBFBD><EFBFBD>Ώۂ<EFBFBD> OS <20><><EFBFBD><EFBFBD><EFBFBD>O<EFBFBD><4F><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+　Windows 2000 を動作対象の OS から外しました。
 
-[ 1.2.5 <EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1.2.6 <EFBFBD>ւ̕ύX<EFBFBD>_ ]
+[ 1.2.5 から 1.2.6 への変更点 ]
 
-<EFBFBD>EGUI <EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40>o<EFBFBD>ߕ\<5C><><EFBFBD>̃p<CC83>[<5B>Z<EFBFBD><5A><EFBFBD>g<EFBFBD><67> 0.1% <20><><EFBFBD>݂ɂȂ<C982><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD><45><EFBFBD>X<EFBFBD>g<EFBFBD>ł̃t<CC83>@<40>C<EFBFBD><43><EFBFBD>̕<EFBFBD><CC95>ѕ<EFBFBD><D195><EFBFBD><EFBFBD>̂̃G<CC83>N<EFBFBD>X<EFBFBD>v<EFBFBD><76><EFBFBD>[<5B><><EFBFBD>[<5B><><EFBFBD>ɂȂ<C982><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・GUI の変更点
+　経過表示のパーセントが 0.1% 刻みになりました。
+　ファイル・リストでのファイルの並び方が昔のエクスプローラー風になりました。
 
-<EFBFBD>E<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@PAR2 <EFBFBD>ő傫<EFBFBD>ȃt<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꍇ<EFBFBD>A<EFBFBD>쐬<EFBFBD>╜<EFBFBD><E2959C><EFBFBD><EFBFBD><EFBFBD>ȑO<C891><4F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȃ<EFBFBD><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@PAR2 <EFBFBD>ň<EFBFBD><EFBFBD><EFBFBD><EFBFBD>郊<EFBFBD>J<EFBFBD>o<EFBFBD><EFBFBD><EFBFBD>E<EFBFBD>u<EFBFBD><EFBFBD><EFBFBD>b<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD><EFBFBD> 65535<33>‚܂łɑ<C582><C991>₵<EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・クライアントの変更点
+　PAR2 で大きなファイルを扱う場合、作成や復元が以前よりも速くなりました。
+　PAR2 で扱えるリカバリ・ブロック数を 65535個までに増やしました。
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-v1.2.5 <EFBFBD>̍X<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD><EFBFBD> (2014/05/25)
+v1.2.5 の更新情報 (2014/05/25)
 
-<EFBFBD>@<40>Â<EFBFBD><C382>N<EFBFBD><4E><EFBFBD>C<EFBFBD>A<EFBFBD><41><EFBFBD>g (par3j_old.exe) <EFBFBD>͂<EFBFBD><EFBFBD><EFBFBD> MultiPar <EFBFBD>ł͎g<EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+　古いクライアント (par3j_old.exe) はもう MultiPar では使えません。
 
-[ 1.2.4 <EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1.2.5 <EFBFBD>ւ̕ύX<EFBFBD>_ ]
+[ 1.2.4 から 1.2.5 への変更点 ]
 
-<EFBFBD>EGUI <EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʂɂ<CA82><C982><EFBFBD><EFBFBD><EFBFBD><EFBFBD>u<EFBFBD><75><EFBFBD>b<EFBFBD>N<EFBFBD><4E><EFBFBD>o<EFBFBD>󋵂̕\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>₷<EFBFBD><E282B7><EFBFBD>Ȃ<EFBFBD><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40><><EFBFBD>ʂ<EFBFBD><CA82>‚<EFBFBD><C282><EFBFBD><EFBFBD>ۂɁA<C981><41><EFBFBD>쒆<EFBFBD>̃N<CC83><4E><EFBFBD>C<EFBFBD>A<EFBFBD><41><EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><49><EFBFBD>ł<EFBFBD><C582><EFBFBD><EFBFBD>悤<EFBFBD>ɂȂ<C982><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・GUI の変更点
+　検査画面におけるブロック検出状況の表示が見やすくなりました。
+　画面を閉じる際に、動作中のクライアントを強制終了できるようになりました。
 
-<EFBFBD>E<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꂽ<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>▼<EFBFBD>O<EFBFBD><4F><EFBFBD>ύX<CF8D><58><EFBFBD>ꂽ<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ƌ<EFBFBD><C68C>‚<EFBFBD><C282><EFBFBD><EFBFBD>悤<EFBFBD>ɂȂ<C982><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40>ǂ̏C<CC8F><43><EFBFBD><EFBFBD><EFBFBD>”\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>߁A<DF81>I<EFBFBD><49><EFBFBD>R<EFBFBD>[<5B>h<EFBFBD><68><EFBFBD>g<EFBFBD><67><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
-<EFBFBD>@<40><><EFBFBD><EFBFBD><EFBFBD>悤<EFBFBD>ȃf<C883>[<5B>^<5E>̃X<CC83><58><EFBFBD>C<EFBFBD>X<EFBFBD><58><EFBFBD>T<EFBFBD><54><EFBFBD>ۂɃt<C983><74><EFBFBD>[<5B>Y<EFBFBD><59><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・クライアントの変更点
+　分割されたファイルや名前が変更されたファイルをもっと見つけるようになりました。
+　どの修復が可能かを示すため、終了コードを拡張しました。
+　似たようなデータのスライスを探す際にフリーズする問題を修正しました。
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
-v1.2.4 <EFBFBD>̍X<EFBFBD>V<EFBFBD><EFBFBD><EFBFBD><EFBFBD> (2014/03/16)
+v1.2.4 の更新情報 (2014/03/16)
 
-<EFBFBD>@<40>J<EFBFBD><4A><EFBFBD>‹<EFBFBD><C28B><EFBFBD> Visual Studio 6.0 <EFBFBD><EFBFBD><EFBFBD><EFBFBD> Visual Studio 2008 <EFBFBD>ɕς<EFBFBD><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
+　開発環境が Visual Studio 6.0 から Visual Studio 2008 に変わりました。
 
-[ 1.2.3 <EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1.2.4 <EFBFBD>ւ̕ύX<EFBFBD>_ ]
+[ 1.2.3 から 1.2.4 への変更点 ]
 
-<EFBFBD>E<EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD>[<5B>̕ύX<CF8D>_
-<EFBFBD>@MultiPar <EFBFBD><EFBFBD><EFBFBD>N<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ă<EFBFBD><EFBFBD>Ԃ́A<EFBFBD>C<EFBFBD><EFBFBD><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>A<EFBFBD><41><EFBFBD>C<EFBFBD><43><EFBFBD>X<EFBFBD>g<EFBFBD>[<5B><><EFBFBD><EFBFBD><EFBFBD>ł<EFBFBD><C582>Ȃ<EFBFBD><C882>Ȃ<EFBFBD><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・インストーラーの変更点
+　MultiPar が起動してる間は、インストールやアンインストールができなくなりました。
 
-<EFBFBD>EGUI <EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@<40><><EFBFBD><EFBFBD> MultiPar <EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>쒆<EFBFBD>Ȃ<EFBFBD><EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>̏<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>I<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>̂<EFBFBD><EFBFBD>҂‚悤<EFBFBD>ɂ<EFBFBD><EFBFBD>܂<EFBFBD><EFBFBD><EFBFBD><EFBFBD>B
-<EFBFBD>@<40><><EFBFBD>當<EFBFBD><E795B6><EFBFBD>܂ł̃t<CC83>@<40>C<EFBFBD><43><EFBFBD>E<EFBFBD>p<EFBFBD>X<EFBFBD>ɑΉ<C991><CE89>ł<EFBFBD><C582><EFBFBD><EFBFBD>悤<EFBFBD>ɂȂ<C982><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・GUI の変更点
+　他の MultiPar が動作中なら、その処理が終わるのを待つようにしました。
+　約千文字までのファイル・パスに対応できるようになりました。
 
-<EFBFBD>E<EFBFBD>N<EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>A<EFBFBD><EFBFBD><EFBFBD>g<EFBFBD>̕ύX<EFBFBD>_
-<EFBFBD>@PAR2 <EFBFBD>Ń\<5C>[<5B>X<EFBFBD>E<EFBFBD>t<EFBFBD>@<40>C<EFBFBD><43><EFBFBD>ɑ<EFBFBD><C991>̃t<CC83>@<40>C<EFBFBD><43><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ĂĂ<C482><C482><EFBFBD><EFBFBD>o<EFBFBD>ł<EFBFBD><C582><EFBFBD><EFBFBD>悤<EFBFBD>ɂȂ<C982><C882>܂<EFBFBD><DC82><EFBFBD><EFBFBD>B
+・クライアントの変更点
+　PAR2 でソース・ファイルに他のファイルが混じってても検出できるようになりました。
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

alpha/help/0409/batch.htm

@@ -60,8 +60,9 @@ you must set a local variable as "<code>setlocal enabledelayedexpansion</code>"
 <tr><td><a href="#C1">Create individual PAR2 set in each selected folder (with GUI)</a><td>
 <tr><td><a href="#C2">Create individual PAR2 set in each subfolder under a selected folder (with GUI)</a><td>
 <tr><td><a href="#C3">Create one PAR2 file per each file in a selected folder</a><td>
-<tr><td><a href="#C4">Create individual PAR2 set per each set of 4 files from many selected files</a><td>
-<tr><td><a href="#C5">Create PAR2 recovery data and append it to each original ZIP / 7-Zip archive file</a><td>
+<tr><td><a href="#C4">Create individual PAR2 set per each RAR archive in a selected folder</a><td>
+<tr><td><a href="#C5">Create individual PAR2 set per each set of 4 files from many selected files</a><td>
+<tr><td><a href="#C6">Create PAR2 recovery data and append it to each original ZIP / 7-Zip archive file</a><td>
 <tr><td><hr width="95%"></td>
 <tr><td><a href="#V1">Verify and/or Repair individual PAR2 set in each selected folder with GUI</a><td>
 <tr><td><a href="#V2">Create, Verify or Repair individual PAR2 set in each subfolder under a selected folder with GUI</a><td>
@@ -91,7 +92,7 @@ It is possible to show GUI for setting, too.
 </table>
 </p>
 
-<textarea cols=64 rows=23 readonly wrap=off>
+<textarea cols=64 rows=22 readonly wrap=off>
 @ECHO OFF
 SETLOCAL
 
@@ -121,7 +122,7 @@ When a GUI is closed, next GUI is opened with next folder.
 You may set an option in "Automated tasks" to close GUI automatically after creation.
 </p>
 
-<textarea cols=64 rows=21 readonly wrap=off>
+<textarea cols=64 rows=20 readonly wrap=off>
 @ECHO OFF
 SETLOCAL
 
@@ -150,7 +151,7 @@ Because all MultiPar GUIs will open at once for each folder,
 you can start each creation anytime.
 </p>
 
-<textarea cols=64 rows=21 readonly wrap=off>
+<textarea cols=64 rows=20 readonly wrap=off>
 @ECHO OFF
 SETLOCAL
 
@@ -185,7 +186,7 @@ For example, when there are 7 subfolders, total 7 PAR2 set are made.
 </table>
 </p>
 
-<textarea cols=64 rows=33 readonly wrap=off>
+<textarea cols=64 rows=29 readonly wrap=off>
 @ECHO OFF
 SETLOCAL
 
@@ -229,7 +230,7 @@ You may check "Always use folder name for base filename" option in "Client behav
 then each PAR2 set is named by the folder.
 </p>
 
-<textarea cols=64 rows=33 readonly wrap=off>
+<textarea cols=64 rows=29 readonly wrap=off>
 @ECHO OFF
 SETLOCAL
 
@@ -276,7 +277,7 @@ For example, when there are 7 files in the folder, total 7 PAR2 files are made.
 </table>
 </p>
 
-<textarea cols=64 rows=33 readonly wrap=off>
+<textarea cols=64 rows=29 readonly wrap=off>
 @ECHO OFF
 SETLOCAL
 
@@ -315,6 +316,80 @@ By this option, index file isn't created.
 <hr>
 
 <a name="C4"></a>
+<h3>Create individual PAR2 set per each RAR archive in a selected folder</h3>
+<p>
+<table border=1 cellspacing=0 cellpadding=2 width="100%">
+<tr><td>Command<td>"path of batch file" "path of a folder"
+<tr><td>Input<td>specify a folder
+<tr><td>Action<td>This sample creates individual PAR2 set per each RAR archive file(s) in the selected folder. 
+If RAR archive is single file, PAR2 files are created for it. 
+If RAR archive is splitted into multiple files, PAR2 files are created for them. 
+When you don't select any folder, it will search RAR files in current directory (where the script exists normally).
+</table>
+</p>
+
+<textarea cols=64 rows=52 readonly wrap=off>
+@ECHO OFF
+SETLOCAL enabledelayedexpansion
+
+REM check input path
+IF "%~1"=="" GOTO Start
+IF NOT EXIST "%~1" (
+ECHO The path does not exist.
+GOTO End
+)
+PUSHD %1
+:Start
+
+REM set paramaters for PAR2 client
+SET par2_path="path of par2j.exe"
+SET REDUNDANCY_PERCENT=15
+SET PAR2_FILES=3
+
+REM search file of each single RAR archive
+FOR %%F in (*.rar) do (
+    REM check ".part" in splitted RAR files
+    ECHO "%%~nF" | find ".part" >NUL
+    if ERRORLEVEL==1 (
+        REM when filename doesn't include ".part", create PAR2 file for the RAR file.
+        ECHO Creating parity archives for %%F...
+        %par2_path% c /rr%REDUNDANCY_PERCENT% /rf%PAR2_FILES% /rd1 "%%~nF.par2" "%%F"
+        ECHO Parity archives created for %%F.
+        ECHO.
+    )
+)
+
+REM search the first file of each splitted RAR archive
+FOR %%F in ("*.part1.rar" "*.part01.rar" "*.part001.rar") do (
+    call :SUB_CREATE "%%~nF"
+)
+
+POPD
+ECHO Parity archive creation complete.
+PAUSE
+
+GOTO End
+
+REM sub-routine to create PAR files for multiple input files
+:SUB_CREATE
+ECHO Creating parity archives for multiple %~n1...
+%par2_path% c /rr%REDUNDANCY_PERCENT% /rf%PAR2_FILES% /rd1 "%~n1.par2" "%~n1.part*.rar"
+ECHO Parity archives created for multiple %~n1.
+ECHO.
+
+GOTO :EOF
+
+:End
+ENDLOCAL</textarea>
+
+<p>&nbsp
+The script calls <code>Find.exe</code> and for certain Windows versions, 
+you may have to add <code>C:\Windows\System32</code> to Windows System Path if not already present.
+</p>
+
+<hr>
+
+<a name="C5"></a>
 <h3>Create individual PAR2 set per each set of 4 files from many selected files</h3>
 <p>
 <table border=1 cellspacing=0 cellpadding=2 width="100%">
@@ -361,7 +436,7 @@ Be careful about the number of source files and "<code>SHIFT</code>" per each st
 
 <hr>
 
-<a name="C5"></a>
+<a name="C6"></a>
 <h3>Create PAR2 recovery data and append it to each original ZIP / 7-Zip archive file</h3>
 <p>
 <table border=1 cellspacing=0 cellpadding=2 width="100%">
@@ -449,7 +524,7 @@ When a GUI is closed, next GUI is opened with next PAR2 set.
 </table>
 </p>
 
-<textarea cols=64 rows=21 readonly wrap=off>
+<textarea cols=64 rows=20 readonly wrap=off>
 @ECHO OFF
 SETLOCAL
 
@@ -492,7 +567,7 @@ Next time you specify the folder, MultiPar verifies the 7 subfolders one by one.
 </table>
 </p>
 
-<textarea cols=64 rows=38 readonly wrap=off>
+<textarea cols=64 rows=34 readonly wrap=off>
 @ECHO OFF
 SETLOCAL
 
@@ -555,7 +630,7 @@ but it's invisible by Windows Explorer.
 </table>
 </p>
 
-<textarea cols=64 rows=38 readonly wrap=off>
+<textarea cols=64 rows=37 readonly wrap=off>
 @ECHO OFF
 SETLOCAL
 
@@ -619,7 +694,7 @@ Checksum data must have been saved in an alternate stream "<tt>original filename
 </table>
 </p>
 
-<textarea cols=64 rows=43 readonly wrap=off>
+<textarea cols=64 rows=42 readonly wrap=off>
 @ECHO OFF
 SETLOCAL
 

alpha/help/0409/index.htm

@@ -51,7 +51,7 @@ There are command-line manuals in "<tt>help</tt>" folder.
 </table>
 
 <hr>
-<small>last update 2023/03/20 for version 1.3.2.8</small>
+<small>last update 2023/06/13 for version 1.3.2.9</small>
 
 </body>
 </html>

alpha/help/Command_GUI.txt

@@ -1,4 +1,4 @@
-[ MultiPar GUI - version 1.3.2.6 or later ]
+[ MultiPar GUI - version 1.3.2.9 or later ]
 
 Usage: MultiPar.exe [command] [/base path] [/list path] [files]
 
@@ -99,6 +99,13 @@ write a line of "RecoveryFileLimit=1" under "[Option]" section.
 It's same as an option:
 "Variable (limited to size of largest data file)" on QuickPar.
 
+ If you want to enable "Most Resent Used List",
+write this line "MRUMax=5" under "[Path]" section.
+You may change the number of items after "MRUMax=".
+Because of alphabet, "MRUMax=26" is the maximum.
+If you write "MRUMax=0" or remove the line,
+"Most Resent Used List" is disabled.
+
 
 Example of lines on "MultiPar.ini";
 
@@ -107,4 +114,5 @@ FontName=Arial
 RedundancyMax=10
 Sort=8
 RecoveryFileLimit=1
-
+[Path]
+MRUMax=5